The answer to the hard questions… I mean surfaces

We’re talking plastic, wood, glass, metal, ceramic, and more! Basically, if a cup can be made out of it, then you can decorate it with EasyPSV^®. Although, we’d recommend hand washing for best results and durability!

This sticky back vinyl comes with either a permanent or removable adhesive.

• If it has a gray grid line then it’s permanent.
• If the grid line is mint then it’s removable.

Either way, that paper liner goes face down when cutting, so the colored vinyl side is exposed to the blade. After cutting, remove or “weed” the excess material from the liner. When your design is fully weeded, place Application Tape on top of the EasyPSV to transfer. 

Recommended cut setting from Siserna.com website.

Cricut: Blade: Standard Setting: Vinyl

Silhouette Cameo: Blade: Standard, 2 Material: Vinyl, Glossy Speed: 7 Force: 8

Scan N Cut: Blade: Standard, 3 Cut Speed: 1 Cut Pressure: 2

 

Application Instructions

• Place EasyPSV™ with the liner side down and cut your design. (DO NOT reverse/mirror your design.)
• Weed excess vinyl.
• Remove the application tape’s paper liner and place tape on top of EasyPSV.
• Burnish with a squeegee.
• Lift the application tape and EasyPSV away from the paper liner.
• Place the application tape on your desired object.
• Burnish with a squeegee to fully adhere the design.
• Gently peel away the application tape, leaving just your EasyPSV design on the object

 

EasyPSV™ Permanent Applies to:

glass/mirrors
wood
plastic
metal
ceramic

Care Instructions:

Not recommended for use on drywall or other painted surfaces.
Not recommended for use near flame/ heat source, or with microwave, and dishwasher.